6500-301, Low Flo Heater Sundance® Spas

6500-301, Low Flo Heater for Sundance® Spas

THIS Heater is OBSOLETE- No longer available. See replacement below.

Click here for the current replacement 6500-310 Smart Heater.

Vertical heater assembly 3-1/2" x 13" with 3/4" barb x 3/4" 90° barb inlet/outlets. Rated at 5.5kW/230v

Identical to: SD6500-301, HTR6500301, 6500-301, 9143E, 2-00-0066, 323810810, 46-555-1000, 58030, E2550-1000.  Has threaded tap 3.5" diameter stainless steel housing. Comes with foam wrap.  Hi Limit Sensors is siliconed into the well.

Hint: It is recommended that you install a new high limit sensor 6600-168 while you are replacing the heater.

For Sundance® Spas:

• 1995-98, 650-750 Series: Calypso I, Calypso II, Rio
• 1995-99, 650-750 Series: Montego
• 1995-98 850 Series: Cameo, Capri, Corum, Marin, Maxxus, Optima
• 1995-97 850 Series: Royale
• 1997-99 850 Series: Altamar

For Jacuzzi® Hot Tubs:

• All R270, R280, R290, R300, R310, S125 Models
• All Platinum Models

Notes:

• 1997-99 Tango used the 6500-056 Heater Assembly
• High Limit Sensors were some times siliconed in at the factory. Before ordering make sure you can remove the old sensor and it is usable. Otherwise you will need a new high limit sensor 6600-168.