Artesian Spas Emerald 5.5kW, Heater 230V Low Flow Trombone Stainless Includes Heater Element and Hi-Limit

CURRENT VERSION
Artesian Spas, 5.5kW, Heater 230V,
Stainless Trombone Style 

• 23" X 10" X 15" Squareback
• 3-Wire with Built in Thermal Cut-Out
• Includes Titanium Heater Element and Hi-Limit Disk 
• Low Flow Heater Assembly Style Stainless Steel
• Heater Inlet Size 3/4"
• Heater Inlet Type Barb
• Heater Outlet Size 3/4"
• Heater Outlet Type Barb

Tech Tip:

1. The original heater by Laing is no longer available.
2. Therefore, older system heaters may require modification.
3. The new heater may not fit around the spa pack and must be REMOTE MOUNTED.
4. There will be differences with the new heater and the old unit.
5. The new heater will have 3 wires, instead 2 wires.
6. Connect the Black wire and White wire to the circuit board. The Green wires is the ground wire.
7. Similarly, water fittings / connections may not be the same size.
8. You will need reducer like a small piece of clear pipe set around the smaller connection.
9. This will allow you to slip the larger connection over it.