- Sundance® Spa Parts
- Jacuzzi® Hot Tub Spa Parts
- Artesian Spas™ Parts
- Strong Spas Parts
- Costco® Spas Parts
- Dr Wellness Spa Parts
- Keys Back Yard Spa Parts
- Hot Tub Spa Filters
- Dynasty Spas® Parts
- Hot Tub Spa Parts
- Hot Tub Spa Products
- Jetted Tubs & Whirlpool Parts
- Spa Covers Lifts
- Hot Tub Spa Covers
- Hot Tub Spa Chemicals
Factory Fresh Leisure Time 2 lbs Chlorine Spa 56 Chlorinating Granules
Factory Fresh Leisure Time 2 lbs Chlorine Spa 56 Chlorinating Granules (Sodium Dichlor)
Specifically formulated for spas, this concentrated granular chlorine effectively sanitizes and disinfects hot water. Provides a reliable and easy-to-use source of concentrated chlorine. Can be used as part of the Simple Spa Care Program.
SODIUM DICHLORO-S-TRIAZINE TRIONEDIHYDRATE
- Maintains clean, clear, sanitized water
- EPA approved
Provides a reliable and easy-to-use source of concentrated chlorine.
Leisure Time Spa 56 Chlorinating Granules 5lbs (Sodium Dichlor) Chlorine
Specifically formulated for spas, this concentrated granular chlorine effectively
sanitizes and disinfects hot water.
• Maintains clean, clear, sanitized water
• EPA approved
Add 1/2 oz. of this product per 500 gallons of water prior to entering spa. Wait 5
minutes then check chlorine residual. Residual chlorine must read between 2
and 3 ppm. If it does not, additional dosages of material should be added until it
does. Once the chlorine residual is established in the 2 to 3 ppm range, the spa
or hot tub may be entered.
This product should be added daily or as necessary to maintain 2 to 3 ppm
residual chlorine. Frequent checks should be made of residual chlorine using a
reliable test kit. This product should be broadcast over the surface of the water
and allowed at least 5 minutes mix time before testing. Note: Heavy bather
usage or the use of oils or lotions may increase the chlorine demand resulting in
the need for more frequent checks of chlorine residual. pH should be monitored
with a reliable test kit and maintained at 7.2 to 7.8 for clean water. pH can be
decreased by adding a suitable agent such as sodium bisulfate or increased by
adding Aklalinity Up.
It is good practice to superchlorinate every 2 to 4 weeks. To superchlorinate,
add 1 oz. of this product for each 500 gallons of water. Thoroughly clean spa,
vacuum and cycle through filter. Resume program when chlorine residual reads
2 to 3 ppm.
Shocking the spa after each use will destroy organic bather waste.
Customers also viewed
Current Version OEM 20% Longer Bulb 2012+ OEM CLEARRAY® XL Sundance® & Jacuzzi® UV Bulb Replacement, UV-C, 6472-841 Genuine Factory Part$95.76
LATEST Version Jacuzzi® J-300 Series Spa Filter 2002+ Replaces 6000-383A, Diameter: 6-5/8", Length: 15-1/2" Exact Fit$49.41
Exact Fit Artesian® Spas, Island, Platinum, Resort, Gold, Tidal Fit Swim Spas Filter 06-0006-12, 06-0005-12, Diameter: 6-3/4", Length: 8" Handle Top & Male Thread Bottom$59.87