Current Version Strong Spas Topside Control Panel 7 Button with 7 ft Phone Jack Cord Replaced Obsolete Original

Strong Spas Topside Control Panel 7 Buttons
7’ Cord with 8 conductor phone style connection.
9.8” x 3.1” Overall Size.
Left: Warm, Mode, Cool
Right: Light, Jets 1, Jets 2 

Jets 1
Touch the “Jets 1” button once to turn pump 1 on
or off, and to shift between low and high speeds. If
left running, the low speed of the pump will automatically turn off after 2 hours, and the high speed
will automatically turn off after 15 minutes.

Jets 2
Touch the “Jets 2” button once to turn pump 2 on
or off and to shift between low and high speeds. If
left running, pump 2 will automatically turn off after
15 minutes.

Option (if equipped)
This button is used to turn on the blower/pump in 3
pump spas.This is 1-speed only and will turn off automatically after 15 minutes.

Lights
Press the Light button on the topside control panel
to turn the spa light on. If your spa has perimeter
LED lights, they will also light up at the same time as
the spa light. LEDs operate in four modes.The mode
is changed by turning the light off and then immediately back on
1. Fading: The lights will cycle through all the colors
in this order:White, Cyan, Magenta, Blue,
Yellow/Green, Green, Red
2. Color Locked: This cycle offers a hard color
change without fading.
3. Quick Color Change: Each time you press the
button, you advance to the next color.
4. Flashing white: The LED lights will flash white