6560-423 SUNDANCE®® Temperature Sensor with White Plug Connector For 505, 601-605, and 624 Balboa Systems only! The spas were built in the 1980's. Do not use this sensor on 700 or 800 Systems or newer 600, 600S Systems. Uses 6540-228 O-Ring...

6560-410 SUNDANCE®® Temp FittinSUNDANCE®® Spas wall fitting for use on older SUNDANCE®® Temperature Systems with "Bullet" Style Stainless or Plastic Temp Sensor.  SUNDANCE® Temperature Sensor Mount For SUNDANCE®...

SUNDANCE® Spas Power Transformer, 115v/230v, 12v, without Plug This transformer is for following brands series/control system boards. No plug at end of wire. If you need the version with plugs, you need 6000-515 transformer SUNDANCE® Spas:...

Sundance® Spas 6560-248 Retrofit Light Harness Pre-1987 New Version Without Metal FrameLight harnessfor SUNDANCE® 601, 602, 603 Systems. Click here for the required bulb

 SUNDANCE® Spas Light Wiring

Sundance® Spas Light Bulb for Hot Tub Spas Underwater Light Bulb

Latest Version Sundance® Spas Hi-Limit Sensor, 12" cable Replaced Obsolete Original Used for the following models: 1. 505, 603, 604, 605, and 624 Systems.2. 1990-1991 Suncoast Systems Hi Limits. Single pole rated at 25 amps with...

6560-230, SUNDANCE® 30" Long High Limit Sensor for 602 Systems.

New Version Sundance Spas SunTub Systems, 1993- 03/1996 Replaced Obsolete Original1/4" x 12", SPST, 25 Amp 12" Short High-Limit sensor forUsed on: 505, 603, 604, 605, 624 Systems, and 1990-1991 Suncoast Systems Hi Limits, Suntub 1993-3/96 Single...

6560-046 SUNDANCE®® Spas Gasket, Heater Housing   Goes between the Heater Element (6500-216) and the Connector Box (6560-041). Get the job done right the first time with our Exact Fit Guarantee. This is a...

O-Ring for Heater Unions 6560-044 Sundance® Spas Jacuzzi® 2 qty Size: 2-3/8"ID x 2-5/8"OD x 1/8" thick

6560-043 Sundance® Spas O-Ring for High Flow Heater Plastic heater o-ring.  oes between the Housing 6560-040 and the Element 6500-216