- Sundance® Spa Parts
- Jacuzzi® Hot Tub Spa Parts
- Artesian Spas™ Parts
- Strong Spas Parts
- Costco® Spas Parts
- Dr Wellness Spa Parts
- Dynasty Spas® Parts
- Coleman Spa Parts
- Master Spas Down East Spas Parts
- Hot Tub Spa Filters
- Hot Tub Spa Parts
- Hot Tub Spa Products
- Jetted Tubs & Whirlpool Parts
- Spa Covers Lifts
- Hot Tub Spa Covers
- Hot Tub Spa Chemicals
Strong Spas Topside Control Panel 7 Button with 7 ft Phone Jack Cord
Strong Spas Topside Control Panel 7 Buttons
7’ Cord with 8 conductor phone style connection.
9.8” x 3.1” Overall Size.
Left: Warm, Mode, Cool
Right: Light, Jets 1, Jets 2
Touch the “Jets 1” button once to turn pump 1 on
or off, and to shift between low and high speeds. If
left running, the low speed of the pump will automatically turn off after 2 hours, and the high speed
will automatically turn off after 15 minutes.
Touch the “Jets 2” button once to turn pump 2 on
or off and to shift between low and high speeds. If
left running, pump 2 will automatically turn off after
Option (if equipped)
This button is used to turn on the blower/pump in 3
pump spas.This is 1-speed only and will turn off automatically after 15 minutes.
Press the Light button on the topside control panel
to turn the spa light on. If your spa has perimeter
LED lights, they will also light up at the same time as
the spa light. LEDs operate in four modes.The mode
is changed by turning the light off and then immediately back on
1. Fading: The lights will cycle through all the colors
in this order:White, Cyan, Magenta, Blue,
Yellow/Green, Green, Red
2. Color Locked: This cycle offers a hard color
change without fading.
3. Quick Color Change: Each time you press the
button, you advance to the next color.
4. Flashing white: The LED lights will flash white