Aquafinesse 2 Liter Refill Bottle Aqua Finesse Latest Version Fresh Inventory

Instructions:

Aquafinesse USAGE INSTRUCTIONS

SHAKE WELL BEFORE USE – read instructions carefully.
AquaFinesse TM must be used with an approved sanitizer of choice.

START UP INSTRUCTIONS for use with sanitizing powder kit

1. Drain hot tub completely after running Spa Clean to purge lines in older tubs.
Run garden hose for 60 seconds before fi lling the tub with fresh tap water.
For new tubs: Run garden hose for 60 seconds before fi lling the tub with fresh
tap water.
2. Balance tub water including Alkalinity, PH and total hardness.
3. Shake the bottle of AquaFinesseTM to mix the solution. Pour the correct amount
of AquaFinesse (as indicated in the manual) into the water. Turn on the jets for a
minimum of 2 minutes to activate the AquaFinesseTM water care system.
4. Add one tsp of granules directly to the water and with jets running. Chlorine
reading should be 1.5 – 3 ppm.
5. After each use of the hot tub add one half tsp of granules directly to the water and
with jets running. If the tub is not in regular use this amount can be reduced to one
tsp of granules at least once a week.
6. Rinse fi lter once a week to ensure total sanitation and clean your fi lter with
AquaFinesse fi lter clean once a month.

START UP INSTRUCTIONS for use with sanitizing tablet kit

1. Drain hot tub completely after running AquaFinesse Spa Clean to purge lines in
older tubs. Run garden hose for 60 seconds before fi lling the tub with fresh tap
water. For new tubs: Run garden hose for 60 seconds before fi lling the tub with
fresh tap water.

2. Balance tub water including Alkalinity, PH and total hardness.

3. Shake the bottle of AquaFinesse™ to mix the solution. Pour the correct amount
of AquaFinesseTM (as indicated in the manual) into the water. Turn on the jets for a
minimum of 2 minutes to activate the AquaFinesseTM water care system.

4. Place (1) sanitizer tablet in the slow-release dispenser, close cap, fi ll with water
and place dispenser directly on the top of the fi lter (basket). Check dispenser every
week to make sure tablets are intact. Replace tablet when gone or as needed.
Chlorine reading should be 1.5 – 3 ppm.

5. Rinse fi lter once a week to ensure total sanitation and clean your fi lter with
AquaFinesse fi lter clean once a month.

ONGOING WEEKLY MAINTENANCE

Repeat steps 2 - 5 for tablet kit and 2 - 6 for powder kit on a set day, every week.

MONTHLY
1. We recommend that you have a water sample taken to your retailer for water
balance and hardness testing.
2. Clean your fi lter with AquaFinesse Filter Cleaner.

DOSAGE CHART

AquaFinesse Per Week

250 gal - 6 oz.

251-350 gal - 7 oz.

351-450 gal - 10 oz.

451-550 gal - 13 oz.

551-650 gal - 14 oz.

PROBLEMS, POSSIBLE CAUSES AND SOLUTIONS

CLOUDY WATER

A) organic contaminants build-up A) shock with Spa shock
B) suspended particles B) increase filter circulation time
C) high Ph C) add PH reducer till 7.2-7.6
D) total alkalinity too high D) add AK reducer till 100 p.p.m
E) hardness too high E) reduce hardness
F) poor filtration F) Clean your filter more frequently.
G) high dissolved solids G) Change water every 3-4 months
In all cases clean filters

COLORED WATER

A) dissolved copper, iron and A) have retailer test water
other metals from source water or equipment
B) fragrance B) reduce consumption

ODOR

high level of organic contaminants shock water with a spa shock causing combined chlorine CLEAN FILTERS

EYE/SKIN IRRITATION

A) low pH A) increase Ph to 7.2-7.6
B) combined chlorine due to B) shock water with a spa shockhigh concentration of organic contaminants

NO CHLORINE/ BROMINE

A) high concentration of organic contaminants using up sanitizers A) add sanitizer more regularly or change to different sanitizer

B) test strips may be ineffective B) replace test strips annually