How To Replace Jacuzzi Hot Tub Spa J-300 Spa Pillow 6455-035 Rev B HYDROSOOTHE™ pillow
How to Remove and Install this 6455-035 Rev B HYDROSOOTHE™ pillow by SpaStore.com
1. Remove the cabinet / skirt panel located directly behind the pillow. There will a notice about service access for the pillow.
2. Carefully cut the brown paper and remove the foam until you have access to the pillow wing nuts.
3. Remove the wing nuts
4. Pull the pillow away from the front.
5. Replace with new pillow.
6. Replace the wing nuts.
7. Reuse the foam and paper.
8. Install cabinet / skirt panel(s)
Nov 10th 2023
Recent Posts
-
Hot Tub Spa Is Dead. No Power, No Display
Spa Shows No Power: Step-by-Step Diagnostics Guide ⚠️ Safety First Electrical Expertise Required: O …May 8th 2025 -
How To Wire Connect Sundance Spa Pump Motor
Sundance Spa Pump Motor Wiring Guide: Voltage, Speed Configurations, and Installation Steps ⚠️ Criti …May 8th 2025 -
Sundance Spa Error Code Troubleshooting Guide
Flow/Pressure Switch Issues FL1: Flow/pressure switch not closed when pump is running.Troubleshootin …May 7th 2025