How To Replace LifeSmart Spa LED Light

Spa Light Bulb/LED Replacement

Warning: Always turn off power to the spa at the circuit breaker before beginning.

1.  Power Down: Turn off the spa's power at the circuit breaker.

2.  Gain Access: Remove the equipment compartment access door.

3.  Locate Light: Find the back of the spa light lens from inside the compartment.

4.  Remove Old Light: Grasp the light housing and turn it counter-clockwise about a quarter-turn. Gently pull the entire light assembly out and disconnect the old LED board from its socket.

5.  Install New Light: Connect the new LED board to the socket. Insert the light assembly back into the opening and turn the housing clockwise until it locks into place.

6.  Power Up: Restore power at the circuit breaker and test the new light.

Click here to order

    spastore-lifesmart-how-to-replace-led.jpg

    Oct 22nd 2025 SpaStore.com

    Recent Posts