3” Inch Artesian Spa, Island Spa Jet Insert Rotating Stainless, Years 2009-2012

3” Diameter Artesian Spa, Island Spa Jet Insert, Rotating Stainless Steel, Years 2009-2012

How To Remove & Install Artesian Spas Jet Insert.

To remove the jet insert

1. Turn the jet counterclockwise until it stops.
2. Continue to turn the jet past the stop point to loosen it from the spa.
3. The insert will now pull out.

To reinstall the jet insert

1. Insert the jet into jet body and turn clockwise until fully seated.
2. Tug on it to make sure it is seated properly.
3. Slowly turn clock-wise until it stops.

NOTE: A jet with stainless steel escutcheons can be slippery. The edges can cut.  You can use a soft cloth or jar-opening pad to assist in removing and installing the jet.