Description
275-3287-00, Eaton Mears Hi Limit
1/4" x 12", SPST, 25 Amp
Single pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater
12" capillary length, 1/4" bulb thickness
This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one
12" Short High-Limit sensor for
Used on: 505, 603, 604, 605, 624 Systems, and 1990-1991 Suncoast Systems Hi Limits, Suntub 1993-3/96
This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one
Related Products
Related Products
Artesian Spas Heater Hi Limit Sensor 24'' Cord With 2 Pin Plug
$58.66
Artesian Spas Heater Hi Limit Sensor 24'' Cord With 2 Pin Plug
Softub Thermostat Temperature Sensor / Hi Limit Sensor Probe for Digital & Analog Control Systems Sold as Pair 2001+ Models
$494.00
Softub Thermostat Temperature Sensor / Hi Limit Sensor Probe for Digital & Analog Control Systems Sold as Pair 2001+ Models
How to know if you need a new Softub sensor. You may need to...
Cal Spas Hi Limit Sensor 2 Pin Connector 30" Long
$96.78
Cal Spas Hi Limit Sensor 2 Pin Connector 30" Long
2018 Sundance® Spas Peyton Hi Limit Sensor 2 Pin Connector
$87.64
2018 Sundance® Spas Peyton Hi Limit Sensor with 2 Pin Connector
6560-235 Sundance® Spas Hi-Limit Sensor, 12" cable
$78.55
6560-235 SUNDANCE® Spas Hi-Limit Sensor, 12 inch
Single pole rated at 2