Catalina 12.6 Newporter / 12.6 Regatta / 12.6' Regatta Silver Pool Swim Spa Cover - 151" x 90"
- SKU:
- CA-151x90-RG
- Availability:
- ETA 6-8 Weeks
- Cover Length:
- 151 in
- Cover Width:
- 90 in
- Corners:
- Special Radius
- Panels:
- 4
Description
- Custom made 151" x 90" for Catalina 12.6 Newporter / 12.6 Regatta & more
- 5" to 3" tapered foam, 4 panels, double-wrapped cores
- Reinforced hinge & full-length heat seal standard
- Skirt, tie-down straps, locking clips & handles included
- Made in North America · ETA 6–8 weeks
- Freight shipping included in the price
Made just for your swim spa. Each folding cover is custom made, so all sales are final. Not sure about the fit? Call 858-210-8062 or text 858-215-4460 before you order and we will gladly confirm it.
This folding hard cover is made for the Catalina 12.6 Newporter, 12.6 Regatta and 12.6' Regatta Silver Pool: 151" long and 90" wide with Special Radius corners, in 4 panels that fold at the center hinge. We also make covers for other Catalina swim spas, including the Malibu Swim Spa, C-601, 14' Freestyle and C-603. Prefer one-person access? See the rolling cover for the Catalina 12.6 Newporter.
Fits these models & size
- Catalina 12.6 Newporter
- Catalina 12.6 Regatta
- Catalina 12.6' Regatta Silver Pool
| Length | 151" |
|---|---|
| Width | 90" |
| Corners | Special Radius |
| Cover type | Folding hard cover, 4 panels |
| Foam | 5" at the center hinge, tapering to 3" at the edges |
| Includes | Vinyl skirt, tie-down straps, locking clips, handles |
| Made in | North America |
| Lead time | 6–8 weeks for production and transit |
| Shipping | Freight shipping included in the price |
| Warranty | Limited warranty, 1 to 5 years, depending on the cover model |
Before you order, measure your current cover (length, width and corners) and compare it with this listing, or send us your measurements and we will check the fit for you.
Why our covers are better inside
The part of a cover that matters most is the one you never see: the underside. It faces rising heat and spa chemicals around the clock, so that is where we build ours strongest.
- Double-wrapped foam core. Every foam core is wrapped twice in 6-mil plastic, a heavy-duty 12-mil moisture barrier heat-sealed around the foam. It keeps the cover from soaking up water and getting heavy over time.
- Reinforced hinge. Extra layers of heavy-duty vinyl and scrim, with reinforced stitching, run along the center fold, where a cover flexes every time it is opened.
- Heat seal. A full-length foam seal runs through the center fold to stop heat escaping there and help lower your heating costs.
- Chemical-resistant underside. Many covers use an inexpensive mesh bottom that breaks down quickly. Ours use 11 oz PVC-coated polyester, tested to stand up to high heat and chemical vapor without deteriorating.
- Built for energy efficiency. CAD-precise sizing and premium insulation let the cover seal in heat like a thermal lid, helping lower the cost of keeping your swim spa warm.
Tapered for run-off. The foam is 5" at the center hinge, tapering to 3" at the edges, so rain and melting snow run off instead of pooling on top.
How to check your size
- Measure your current cover from edge to edge along its length, then across its width.
- Check the corners: rounded (radius) or cut at an angle.
- Compare with this listing: 151" x 90" with Special Radius corners.
Not sure? call 858-210-8062 or text 858-215-4460 with your measurements or a photo of your spa and we will confirm the fit. You can also look up your model in our swim spa cover size chart.
Colors
Rust, Wildwood, Walnut, Grey, Ash, Charcoal, Tan, Sky Blue, Navy, Teal, Forest. Pictured in Wildwood. Choose your color from the options above.
Folding cover vs. rolling cover
Folding hard cover (this cover): insulated foam panels that are stiff and seal tightly, so it tends to hold heat better, especially in wind and cold weather. It is heavier, and most owners use a cover lifter to open it.
Rolling cover: much lighter. It rolls back instead of lifting, so one person can open the whole swim spa, but it is less rigid than a hard cover.
Want one-person access? See the rolling cover for this swim spa.
Warranty coverage & exclusions
Coverage. Our insulating covers are warranted to the original owner against defects in materials and workmanship under normal use, for 1 to 5 years, depending on the cover model, starting on the date the cover is delivered to you.
What we do. If we find that your cover failed because of a defect in materials or workmanship within the warranty period, we will repair or replace it with no charge for materials or labor. Freight from Los Angeles, CA is not included.
Foam cores. The foam core warranty is void if anything has punctured or penetrated the outer vinyl or the inner vapor seal.
Not covered.
- Damage from animals, fire, vandalism, wind, storms or other natural events
- Too many chemicals in the water, or contact with other chemicals on the cover, including Armor All and other petroleum-based products
- Improper installation, strain, misuse, abuse, abrasion, accidents or neglect
- Alterations, or repairs by anyone other than our authorized representatives without our written approval
- Broken foam or torn vinyl from walking, standing or sitting on the cover, or from the weight of rain, water, snow or animals: the cover is not built to carry weight
- Damage caused by cover lifts
- Normal wear and tear, and layers that separate or seams that split from improper handling
- Fading of the vinyl or thread, which happens naturally with sun, weather, water care and age
- Scuffs, chafing or holes from dragging the cover or leaning or storing it against sharp objects
- Damage during transport from a dealer to the buyer
- Using the cover for anything other than covering your swim spa
The warranty applies to the original owner only. SpaStore.com is not liable for incidental or consequential damages.
Frequently asked questions
Will this cover fit my swim spa?
This cover is 151" x 90" with Special Radius corners and is made for Catalina 12.6 Newporter / 12.6 Regatta / 12.6' Regatta Silver Pool. Before you order, measure your current cover (length, width and corners) and compare it with this listing, or send us your measurements and we will check the fit for you.
How do I open it?
The 4 panels fold in half at the center hinge, then the folded cover comes off the spa. Most owners use a cover lifter to make opening and closing easier.
Can I return or exchange the cover?
Every folding cover is custom made to your swim spa's size, so all sales are final. We would rather help you get it right the first time: check the size and models above, and contact us before you order if you would like us to confirm the fit.
Where is it made, and when will it arrive?
It is made in North America and built to order. Please allow 6–8 weeks for production and transit. Freight shipping is included in the price.
How much is shipping?
Nothing extra. Freight shipping is included in the price you see, so there is no shipping charge at checkout.
How thick is the foam?
The foam is 5" at the center hinge, tapering to 3" at the edges. The taper lets rain and melting snow run off the cover.
What comes with the cover?
The cover comes with its vinyl skirt, tie-down straps, locking clips and handles.
What is the warranty?
A limited warranty against defects in materials and workmanship for 1 to 5 years, depending on the cover model, from the date of delivery. See Warranty coverage & exclusions above for what is and is not covered.
Which colors can I choose?
Rust, Wildwood, Walnut, Grey, Ash, Charcoal, Tan, Sky Blue, Navy, Teal, Forest. The photos show Wildwood.
Is there a lighter option?
Yes. The rolling cover for this swim spa rolls back instead of lifting, so one person can open it.
Can someone help me check the size?
Yes. call 858-210-8062 or text 858-215-4460 with your measurements or a photo and we will confirm the fit before you order.