Coast Spas

Coast Spas 3/8-inch air bleed assembly that releases trapped air from the plumbing. Letting air escape helps the pump prime and prevents airlocks that leave jets weak or silent after refilling. Fits...

Coast Spas three-lever on/off valve assembly, a grouped set of valves that switch several water circuits from one spot. Each lever opens or closes its own line, so bathers can turn features on or off...

Coast Spas 3-inch gate valve with spigot ends on both sides, used in larger plumbing to shut off water flow for equipment service. Closing the gate lets work be done on pumps or filters without...

Coast Spas 2-inch diverter valve with a grey five-scallop handle, which redirects water between jet zones. The scalloped grip gives your hand plenty to hold when turning the valve. It helps bathers...

Coast Spas check valve with a 2-inch slip connection on one end and a 2-1/2-inch spigot on the other. It lets water travel in only one direction, preventing backflow through the plumbing when...

Coast Spas 2-inch horizontal water diverter in DSG with a clear component, used to route flow between two jet groups. Rotating it balances massage pressure between seats or sends most of it to one...

Coast Spas 2-inch slice valve, slip by spigot, listed as the replacement for an earlier slice valve. It sits in the equipment plumbing and closes off water so a technician can work on the pump or...

Coast Spas 2-inch slice valve with a slip end and a spigot end, installed in the plumbing so a pump or heater can be isolated for service. Sliding the gate closed holds water in the tub while the...

Coast Spas 2-inch flapper bypass valve, a plumbing valve with a hinged flapper that lets water take an alternate path when flow conditions change. It helps manage circulation through the equipment...

Coast Spas 2-inch diverter valve in the Eclipse style, a complete valve that splits pump output between jet zones. Turning the handle shifts pressure toward one area of seating or balances it across...

Coast Spas Revo-DSG 2-inch diverter top cap. This replacement cap seals the top of the valve around the stem so water stays inside and the diverter keeps turning freely. The cap snaps into place,...

Coast Spas replacement handle that fits the Custom Aura diverter valve in the 2-inch size, the grip you turn to move water from one jet zone to another. It presses onto the valve stem and holds...