Drains & Suctions

Coast Spas anti-vortex 8-inch drain that covers a suction opening and breaks up the swirling flow that can form at a drain. The anti-vortex design spreads suction across the cover for safer, steadier...

Coast Spas grey grate, sold as the grate only, that sits over a suction or drain opening to keep hands, hair and debris back from the fitting. Replacing a cracked grate keeps the opening covered...

Coast Spas hi-flow VGB suction cover in black that guards the suction opening where water is pulled back to the pump. It is listed as a super high flow, 2.5-inch cover, so it is meant for high-volume...

Coast Spas L gasket for the 1-1/2-inch hi-flow suction, the seal that sits behind the suction fitting to stop leaks at the shell. A flattened or cracked gasket can let water seep out, so replacing it...

Coast Spas Lo-Pro suction assembly with a 3/4-inch connection in the finish listed as GBM. The low-profile body sits close to the shell while drawing water back to the pump. Fits select Coast Spas...

Coast Spas Lo-Pro suction with a 3/4-inch 90-degree drain elbow in Classic White. The low-profile suction draws water back to the plumbing, and the built-in elbow turns the line ninety degrees behind...

Coast Spas low-profile suction paired with a 90-degree, 3/4-inch drain elbow, finished in Classic White. It sits nearly flush with the shell and routes water through a right-angle turn to the line...

Coast Spas Lo-Profile drain assembly with a 3/4-inch connection, used to let water out of the spa when it is time to drain and refill. Its low profile keeps the drain discreet and easy on bare feet...

Coast Spas Load W. hi-flow suction with a 1-1/2-inch hex connection that pulls water from the spa back to the pump. A sound suction keeps circulation strong and protects the pump from running starved...

Coast Spas Load W. VGB hi-flow suction, 2-inch, in the GMB finish. It covers a pump intake and returns water to the circulation system at high volume. Fits select Coast Spas Classic Traditional,...

Coast Spas Load W. VGB hi-flow suction in a 2-inch size with the GMB finish. This fitting is the point where water leaves the spa for the pump, and the VGB cover guards that opening. Swap it out when...

Coast Spas Load W. VGB super hi-flow suction, 2.5-inch, in the CW finish. The larger suction suits pumps that move high volumes of water and keeps intake flow spread out. Fits select Coast Spas...