Pumps & Motors

Coast Spas 1.5 horsepower two-speed 115V jet pump with an amp-style power cord. It runs the jets on high speed and can circulate or filter on low speed for quieter operation. Fits select Coast Spas...

Coast Spas 110V Silk pump for spas running on household-voltage power. It moves water through the jets and plumbing and is designed to pair with 110V Silk-style systems. Fits select Coast Spas Elite,...

Coast Spas pump extension wire that adapts a 15-amp style connector to a 20-amp style connector, male to female. It lengthens or adapts the amp-type cord between a pump and the control box when the...

Coast Spas 2-1/2-inch union pump end assembly that joins plumbing to the pump. A union lets you disconnect the pump for service by unscrewing a nut instead of cutting pipe. Fits select Coast Spas...

Coast Spas 2-1/2-inch by 2-inch pump union. It threads onto a 2-1/2-inch pump port and steps the connection down to 2-inch plumbing, so the pump can be removed for service without cutting pipe. Fits...

Coast Spas 2-inch union pump end assembly. It connects the plumbing to the pump with a threaded nut, so the pump can be swapped or serviced quickly. Fits select Coast Spas Elite, Classic, Luxury and...

Coast Spas two-speed 1.5 horsepower pump rated for 115V/60Hz. High speed drives the jets, while low speed handles gentle circulation and filtration cycles. Fits select Coast Spas Frontier, Oasis and...

Coast Spas 2 horsepower two-speed pump on a 56 frame motor, built for 50Hz electrical supply. It powers the jets on high and circulates on low. Fits select Coast Spas Northwind, Patio, Wellness and...

Coast Spas 4 horsepower two-speed pump, 230V 60Hz, on a 56 frame with an amp-style cord. It delivers strong jet pressure on high speed and lower-energy circulation on low. Fits select Coast Spas...

Coast Spas 4 horsepower switchless low-amp pump with a green finish. It drives the jets while drawing less current than a standard pump of similar output. Being switchless, speed and on/off are...

Coast Spas 4-inch black motor vent for the equipment area. It lets warm air from pumps and motors escape the cabinet, helping equipment run cooler. Fits select Coast Spas Luxury, Elite, Wellness and...

Coast Spas 4 horsepower Viper wet end for a 56 frame motor. The wet end is the pump housing and impeller section that moves water, so replacing it can restore a pump with a cracked housing or worn...