Spa Packs & Electrical

Coast Spas 5.5kW heater with sensors, supplied without a tailpiece. The higher output warms water faster, and the built-in sensors keep the control informed of temperature for safe operation. Since...

Coast Spas 5.5kW titanium heater with sensors, without tailpiece. A titanium element resists corrosion from water chemistry, supporting longer heater life, while sensors report temperature to the...

Coast Spas 50Hz 230V Silk pack, the control unit that runs pumps, heating and filtration on European-style power. It receives commands from the topside and manages heating and circulation schedules...

Coast Spas 6.3A pump supplied with unions and a 6-foot amp power cord. The 6.3-amp rating reflects its current draw, suiting it to modest jet or circulation duty. Fits select Coast Spas Oasis models...

Coast Spas Balboa Bluetooth cable extension that adds length to the cable between the spa pack and its Bluetooth component. It lets the module or receiver be mounted where it gets a clear signal and...

Coast Spas Balboa replacement circuit board sold without the pack enclosure, matched to a specific Balboa spa pack. It handles relay switching and control logic for the pumps, heater and lights...

Coast Spas Balboa North American one-pump pack rated for 110V service, suited to plug-in style or lower-power spas. The pack runs the single pump, heater and lighting while following the schedule set...

Coast Spas Balboa North American two-pump board, sold as the circuit board without the enclosure. The board coordinates both jet pumps along with the heater and accessory outputs. Choosing the board...

Coast Spas Balboa North American two-pump pack that serves as the control center for jets, heater and accessories. It replaces the complete enclosure and electronics in one swap, which simplifies...

Coast Spas Balboa splitter cable that divides one connection on the spa pack into two, so a pair of devices can share a single port. It is commonly used when adding a second keypad or accessory...

Coast Spas 1.5 horsepower air blower for 220V service with an AMP cord and boots already fitted. The blower pushes air through the system to create the bubbling effect in the spa, and the rubber...

Coast Spas 2 horsepower ME-230 air blower supplied with an AMP cord for direct connection to the spa pack. It feeds air into the jets or air system for a lively bubble massage. Fits select Coast Spas...