Spa Packs & Electrical

Coast Spas GFCI wire, listed as the 15 version, made to connect the ground fault circuit interrupter for the North American VEL100 pack. It carries power from the GFCI protection to the pack so the...

Coast Spas harness for DM5 that connects the DM5 component to the spa's control system. A good harness keeps power and signals flowing reliably between devices. Fits select Coast Spas Elite, Luxury,...

Coast Spas high-end four-pump pack designed for swim spas that run several pumps for swimming current and therapy jets. It centralizes control of the pumps, heater and accessories in one enclosure...

Coast Spas in.touch 3 connectivity device that brings app-based control to a compatible spa pack. Through a phone or tablet, you can adjust water temperature, start pumps and monitor the spa remotely...

Coast Spas in.ye-6 spa pack, the main control system that operates pumps, heating and accessories. It follows the settings and filtration schedule entered at the keypad and keeps the water at the...

Coast Spas M7 sensor in the 14-inch length, supplied with a nut, O-ring and gasket for a sealed installation. The sensor lets the control system monitor water conditions so the pack can regulate...

Coast Spas M7 sensor with 24-inch length, packaged with its nut, O-ring and gasket. It reports water conditions to the spa pack so heating and safety functions work correctly. The longer length suits...

Coast Spas main board only, made for a specific spa pack and sold without the enclosure or heater. The board houses the control circuitry that switches pumps, heater and lights. It is a...

Coast Spas motion sensor switch that turns a connected function on automatically when movement is detected. It adds hands-free convenience, such as activating lighting as someone approaches. Fits...

Coast Spas North American VEL100 spa pack, a compact control system for smaller spas. It runs the pump, heater and lighting, and handles temperature and filtration based on the keypad settings. Fits...

Coast Spas North American BP100G2 one-pump spa pack with a 4.0kW heater. It combines heating and control in one unit to run a single jet pump and maintain water temperature. Fits select Coast Spas...

Coast Spas North American BP100G2 two-pump pack with a 4.0kW heater. It controls both jet pumps, heats the water and runs automatic filtration cycles. Fits select Coast Spas Oasis, Classic, Classic...