$2.18
Not Sure If This Fits?
TAP TO TEXT PHOTOS
Get a Guaranteed Exact-Fit Match
From Our 32-Years Of Expertise.
Over 300,000 Customers Served.
Frequently bought together:
Description
Coast Spas o-ring for a 1-inch shut-off cap. It seals the cap on a 1-inch shut-off valve, helping the valve close fully and preventing water from weeping around it. Replacing a flattened or cracked o-ring often cures a drip at the valve. Compare the o-ring with your cap and confirm the 1-inch valve size before ordering.
Search: 1 inch shut off o-ring, hot tub valve cap seal, spa shutoff valve o-ring, slice valve o-ring
Related Products
Related Products
Coast Spa O-Ring Mini Jet
$3.50
Coast Spas O-ring for a mini jet, a small rubber seal that keeps water from slipping past the jet insert. A worn, flattened, or cracked O-ring can let a mini jet leak, rattle, or lose pressure...
Coast Spa O-Ring - 2" Union
$3.08
Coast Spas o-ring for 2-inch union fittings used where pumps, heaters and main lines join. It sits between the union faces to stop water from escaping when the nut is tightened. Made of EPDM, it...
Coast Spa 1" Shp Cap
$1.00
Coast Spas 1-inch cap that closes off the end of a 1-inch line or fitting. It is useful for sealing off a port that is not in use or protecting an open end. Fits select Coast Spas Classic and Elite...
Coast Spa O-Ring for Laminar Jet Nozzle
$2.20
Coast Spas O-ring for a laminar jet nozzle that seals the nozzle so the water leaves as a smooth, clear arc. When this seal wears out, the laminar stream can sputter, spray, or leak at the fitting...
Coast Spa O-Ring, Top Load Filter lid
$26.63
Coast Spas o-ring for the top-load filter lid that seals the lid to the housing so the filter holds pressure and water cannot slip past the cartridge. Made from EPDM rubber, it tolerates sanitizers...