Plumbing & Fittings

Coast Spas 1-1/2-inch slip by slip 45-degree elbow that changes the direction of a plumbing run by a gentle angle. The softer bend helps keep water flowing smoothly with less restriction than a sharp...

Coast Spas 1-1/2-inch slip by slip 90-degree elbow that turns a plumbing line at a right angle. It is commonly used where pipe has to route around equipment or the spa frame. Fits select Coast Spas...

Coast Spas 1-1/2-inch slip by slip 90 elbow, a PVC fitting that makes a right-angle turn in the spa plumbing. A cracked elbow can cause leaks under the cabinet, so replacing it promptly helps protect...

Coast Spas 1-1/2-inch slip by slip coupling that joins two lengths of PVC pipe in a straight line. It is a simple way to repair a damaged section of pipe or extend an existing run. Fits select Coast...

Coast Spas 1-1/2-inch slip by slip by slip tee that splits or combines flow at a three-way junction in the plumbing. Tees are used to branch lines to jets, equipment or bypass loops. Fits select...

Coast Spas 1-1/2-inch Schedule 40 male adapter with a male thread on one end and a slip socket on the other. It joins glued PVC pipe to a threaded port on equipment like pumps, heaters or filters...

Coast Spas 1-1/2-inch slip plug that glues into a fitting socket to permanently seal an unused opening in the plumbing. It is handy for closing off tees or ports when a line is removed or not needed...

Coast Spas 1-1/2-inch spigot by slip 45-degree street elbow that creates a 45-degree turn while fitting directly into another socket. It keeps offsets compact in tight equipment bays. Fits select...

Coast Spas 1-1/2-inch spigot by street 90-degree elbow, with a spigot end that glues directly into another fitting. Because one side slips straight into a socket, it allows tight right-angle turns...

Coast Spas reducing tee with two 1-1/2-inch slip sockets and one 2-inch slip socket for joining pipes of different sizes at a single branch. It lets a larger line feed into or draw from a 1-1/2-inch...

Coast Spas 1-1/2-inch by 1-inch spigot by slip reducer bushing that steps a 1-1/2-inch socket down to accept 1-inch pipe. It fits inside a larger fitting so you can change pipe size without adding a...

Coast Spas 1-1/2-inch by 1-inch reducer bushing with a spigot outside and a slip socket inside, used to drop down a pipe size within a fitting. It is a tidy way to connect a 1-inch line to a...