Plumbing & Fittings

Coast Spas 2-inch slip x slip coupling for connecting two straight runs of 2-inch pipe end to end. Pipe is cemented into each socket, making it a simple way to extend a line or patch a section...

Coast Spas 2-inch slip x slip x slip tee that splits one 2-inch line into two, or merges two lines into one. All three ends are sockets, so it is commonly used where suction or return plumbing...

Coast Spas 2-inch slip x slip x slip tee for creating a branch in 2-inch plumbing. Each of the three sockets accepts glued pipe, letting water divide toward separate jet groups or combine from...

Coast Spas 2-inch slip plug that caps off an open 2-inch socket fitting, closing unused ports or lines in the plumbing. It glues into the fitting to create a permanent watertight end. This plug is...

Coast Spas 2-inch slip plug used to seal the end of a 2-inch socket where a line or port is no longer needed. Solvent-cemented in place, it stops water from escaping a dead-end fitting during repairs...

Coast Spas 2-inch spigot x slip 45-degree street elbow. The spigot end plugs directly into a socket fitting while the other end accepts pipe, giving a gentle angle change without an extra pipe stub...

Coast Spas 2-inch spigot x slip 45-degree street elbow that offsets a line at a shallow angle in limited space. Inserting the spigot end into an existing fitting keeps the assembly short and tidy...

Coast Spas 2-inch spigot x street 90-degree elbow for tight right-angle turns. Because one end is a spigot that inserts straight into another fitting, it eliminates a short piece of pipe and keeps...

Coast Spas reducer fitting with a 2-inch spigot end stepping down to a 3/4-inch ST BR connection. It joins a large-diameter line to a much smaller one, typically where a branch line or accessory...

Coast Spas 2-inch x 1-1/2-inch spigot x slip bushing for stepping a 2-inch fitting down to 1-1/2-inch pipe. The spigot end inserts into a 2-inch socket, while the inner socket accepts 1-1/2-inch...

Coast Spas 2-inch x 1-1/2-inch spigot x slip bushing used to reduce plumbing from 2-inch to 1-1/2-inch at a fitting. It seats inside a 2-inch socket and receives 1-1/2-inch pipe, often where a pump...

Coast Spas 2-inch x 1-1/2-inch slip x slip x slip tee that branches a smaller line off a 2-inch run. The reduced side outlet lets a 1-1/2-inch line feed or draw from main plumbing without a separate...