Plumbing & Fittings

Coast Spas 2-1/2-inch by 2-inch spigot by slip reducer bushing that steps a 2-1/2-inch socket down to accept 2-inch pipe. It keeps size transitions compact in main lines. Fits select Coast Spas...

Coast Spas 2-inch Schedule 40 male adapter with a male thread on one side and a slip socket on the other. It connects 2-inch PVC pipe to threaded equipment ports such as pumps or filters. Fits select...

Coast Spas 2 by 2-1/2-inch buttress threaded fitting that joins plumbing to equipment using a coarse buttress thread. This thread style is common on pump and heater connections because it seals well...

Coast Spas 2-inch Balboa union that connects a pump or heater to the plumbing with a removable nut. It lets you take equipment off for service without cutting pipe. Fits select Coast Spas Elite,...

Coast Spas 2-inch diverter primary cap in clear, made for Aura series diverter valves. It seals around the valve stem to keep water inside the valve body, and the transparent shell lets you see...

Coast Spas 2-inch diverter primary cap in a shallow profile. This cap closes off the top of a 2-inch diverter valve body and holds the internal stem in place so the valve can redirect water between...

Coast Spas 2-inch slip by 2-inch spigot 90-degree elbow used to turn main plumbing lines a full right angle inside the equipment bay. One end accepts pipe into its socket while the spigot end slides...

Coast Spas 2-inch slip x slip 45-degree elbow for angling main plumbing lines at a gentle bend. Both ends are sockets that accept 2-inch pipe, so it can redirect a run around equipment with less flow...

Coast Spas 2-inch slip x slip 45-degree elbow that lets a plumbing run change direction at a moderate angle. Pipe glues into each socket end, making it handy for offsetting a line around the pump,...

Coast Spas 2-inch slip x slip 90-degree elbow for making right-angle turns in main circulation plumbing. Each end is a socket that takes 2-inch pipe, a common fitting when replacing cracked or...

Coast Spas 2-inch slip x slip 90-degree elbow used wherever a 2-inch line must turn a corner. Gluing pipe into both sockets gives a solid, leak-free bend, useful for rebuilding a damaged section of...

Coast Spas 2-inch slip x slip coupling that joins two lengths of 2-inch pipe in a straight line. It is the go-to fitting for splicing in a repair after cutting out a cracked or leaking section of...