Coast Spas

Coast Spas 2-1/2-inch slip x slip sweep 90 elbow for larger-diameter plumbing. Its long, smooth curve keeps high-volume flow moving efficiently around a corner. Fits select Coast Spas Swim and...

Coast Spas 2-inch slip x 2-inch spigot sweep 90 elbow. The long-radius sweep turns water more gradually than a standard elbow, which helps reduce flow restriction on main lines. The spigot end fits...

Coast Spas 1/4-inch EPMD hose rated to 200 PSI for small high-pressure lines. Its narrow bore suits applications such as bleed, sensor or air lines where a compact, durable hose is needed. Fits...

Coast Spas 3/4-inch pipe strap clamp for securing small-diameter plumbing in place. It keeps 3/4-inch lines from sagging or rubbing against other components inside the cabinet. Fits select Coast Spas...

Coast Spas 3/4-inch double wire clamp in stainless steel for fastening flexible tubing onto barbs, manifolds and union connections. Its twin wires apply even pressure around the hose, so the joint...

Coast Spas 2-inch pipe strap clamp that anchors main plumbing lines to the spa frame or floor. Keeping heavy 2-inch pipe secured limits movement from pump vibration and takes stress off glued joints...

Coast Spas 1-1/2-inch grey PVC pipe strap clamp for holding plumbing securely to the frame or base. Strapping the pipe down reduces vibration and strain on joints, especially near pumps. Fits select...

Coast Spas 1/4-inch braided PVC hose for small water or air lines. The braided reinforcement helps the hose hold its shape and resist bursting, while staying flexible enough to route through a...

Coast Spas 1-1/2-inch x 1-inch bell reducer that tapers plumbing from 1-1/2-inch down to 1-inch. The gradual bell shape steps the line down smoothly, joining components or pipes of different sizes...

Coast Spas barb fitting with a 1/2-inch spigot end and a 3/8-inch barb. It converts a 1/2-inch socket connection to a small hose barb, useful for attaching thin tubing to rigid plumbing. Fits select...

Coast Spas barb wye with three 3/4-inch ribbed barb outlets. The Y shape splits or merges flow at a gentler angle than a tee, helping keep water moving smoothly between flexible lines. Fits select...

Coast Spas barb adapter tee sized 3/4-inch x 3/4-inch x 3/8-inch. It joins two 3/4-inch tubes and adds a smaller 3/8-inch branch, often used to tap an air or bleed line off a water line. Fits select...