Coast Spas

Coast Spas 1 by 1 by 3/4-inch Schedule 40 PVC threaded tee that branches a 3/4-inch threaded connection off a 1-inch line. It is useful for adding gauges, drains or small branch lines. Fits select...

Coast Spas 1-inch street 90 elbow with a spigot end, made to turn a corner right at another fitting. It keeps plumbing compact in crowded equipment areas. Fits select Coast Spas Classic, Oasis and...

Coast Spas 1-inch spigot by street 90 elbow whose spigot end fits directly into another fitting's socket. It allows tight right-angle connections without adding a short piece of pipe. Fits select...

Coast Spas 1-inch slip tee with three slip sockets that splits one line into two or merges two into one. It is often used to branch water to additional jets or equipment. Fits select Coast Spas...

Coast Spas 1-inch slip by slip coupling that connects two pieces of 1-inch pipe end to end. It is commonly used to splice in a repair after cutting out a damaged section. Fits select Coast Spas...

Coast Spas 1-inch 90-degree elbow with two slip sockets, used to turn a pipe run sharply around the spa frame or equipment. Replacing a cracked elbow helps stop slow leaks in the cabinet. Fits select...

Coast Spas 1-inch slip by slip 90 elbow that makes a right-angle turn in 1-inch spa plumbing. It is a basic building block for routing lines to jets and equipment. Fits select Coast Spas Wellness,...

Coast Spas 1-inch slip by slip 45-degree elbow that bends a 1-inch line at a gentle angle. The shallow turn helps route pipe around obstructions with less flow resistance than a 90. Fits select Coast...

Coast Spas 1-inch Schedule 40 PVC slip union that joins two pipes with a threaded collar you can take apart later. Unions make it easy to remove equipment for service without cutting the plumbing...

Coast Spas 1-inch slip plug, a PVC fitting that glues into a socket to permanently close an opening. Plugs are often used when equipment is bypassed or a tee outlet is no longer needed. Fits select...

Coast Spas 1-inch slip plug that cements into a 1-inch socket to seal an unused outlet. It is a simple way to close a branch in the plumbing when a line is removed. Fits select Coast Spas Classic,...

Coast Spas 1-inch cap that closes off the end of a 1-inch line or fitting. It is useful for sealing off a port that is not in use or protecting an open end. Fits select Coast Spas Classic and Elite...