DJAGB-0001 Sta-Rite 2.0 HP 1-Speed Spa Pump 115/230V 48 Frame. 3" O.D. Fittings New Version Replaced Obsolete Original

Direct replacement for obsolete model DJAGB-0001. New version 2.0 HP 1-speed spa pump 115/230V 48 Frame, 3" O.D. fittings.

• 2.0 HP 1-Speed
• 115/230V
• 48 frame motor
• Intake 2" (3" O.D.), discharge 2" (3" O.D.)
• Sta-Rite Dura-Jet DJ wet end (pump housing)

Will It Replace My DJAGB-0001?

1. Check your old motor label: 2.0 HP, 1-speed, 115/230V.
2. Match the voltage exactly. This spa pump is 115/230V. The wrong voltage can burn out the motor or keep it from running.
3. Measure the outside diameter (O.D.) across the threads of both openings: intake about 3", discharge about 3". Measure across the widest point of the threads, not the pipe opening.
4. Check the wet end (the plastic pump housing): it should match Sta-Rite Dura-Jet DJ.
5. Confirm a 48 frame motor.
6. Not sure? Call 858-210-8062 or text photos of your old pump and motor label to 858-215-4460.

Complete Pump or Motor Only?

A complete pump (motor plus wet end) is the easiest swap and replaces a cracked, leaking or worn housing at the same time. If your wet end is in good shape and only the motor failed (hums, won't start, or trips the breaker), a motor-only replacement costs less but requires moving the wet end, impeller and shaft seal to the new motor. Call 858-210-8062 with SKU NLA8698-1SP for the matching motor-only option.

Specifications

Parts You May Need for the Install

Replacing these while the pump is out prevents leaks:

• Motor Base, Waterway, Self Aligning, 48 Frame, Rubber (0101-072-95)
• Air Tubing, 1/8"ID x 1/4"OD, 10 foot Roll (5001-555-95)
• O-Ring, 2-5/8" ID, 1/8" Cross Section, Generic (1325-324-09)
• Lube Tube, Roper Products, 4oz, with PFTE (0501-573-88)
• Pump Union, 2" Female Buttress Thread x 2" Slip, Quantity 2 (1601-201-98)

Other Sta-Rite Dura-Jet DJ Sizes

• Sta-Rite Dura-Jet DJ 1.0 HP 1-Speed Spa Pump 115V, 2" fittings (NLA8695-1SP)
• Sta-Rite Dura-Jet DJ 1.0 HP 1-Speed Spa Pump 230V, 2" fittings (NLA8696-1SP)
• Sta-Rite Dura-Jet DJ 1.5 HP 1-Speed Spa Pump 115/230V, 2" fittings (NLA8697-1SP)
• Sta-Rite Dura-Jet DJ 2.5 HP 1-Speed Spa Pump 230V, 2" fittings (NLA8699-1SP)
• Sta-Rite Dura-Jet DJ 1.0 HP 2-Speed Spa Pump 115V, 2" fittings (NLA8700-2SP)
• Sta-Rite Dura-Jet DJ 1.5 HP 2-Speed Spa Pump 115V, 2" fittings (NLA8701-2SP)
• Sta-Rite Dura-Jet DJ 1.5 HP 2-Speed Spa Pump 230V, 2" fittings (NLA8702-2SP)
• Sta-Rite Dura-Jet DJ 2.0 HP 2-Speed Spa Pump 230V, 2" fittings (NLA8703-2SP)
• Sta-Rite Dura-Jet DJ 2.5 HP 2-Speed Spa Pump 230V, 2" fittings (NLA8704-2SP)
• Sta-Rite Dura-Jet DJ 3.0 HP 2-Speed Spa Pump 230V, 2" fittings (NLA8705-2SP)
• Sta-Rite Dura-Jet DJ 2.0 HP 1-Speed Spa Pump 115/230V, 2" fittings (NLA8724-1SP)
• Sta-Rite Dura-Jet DJ 2.0 HP 2-Speed Spa Pump 230V, 2" fittings (NLA8726-2SP)

DJAGB-0001 Replacement FAQ

What replaces the DJAGB-0001 spa pump motor?

NLA8698-1SP is the new version that replaces that obsolete original model. It is a 2.0 HP, 1-speed, spa pump, 115/230V, 48 Frame with 2" fittings (3" O.D.).

Is DJAGB-0001 obsolete?

Yes. The original model has been replaced by a new version. This spa pump is the current replacement and also replaces 2 other part numbers, including DJAGB-0001.

Where do I find DJAGB-0001 on my hot tub pump?

Look at the label on the side of the motor. It is printed on the MODEL line.

What size fittings does the DJAGB-0001 replacement have?

Intake 2" (3" outside diameter) and discharge 2" (3" outside diameter), measured across the threads.

Questions or not sure it fits? Call 858-210-8062 or text photos of your old pump and motor label to 858-215-4460.

California residents: WARNING, cancer and reproductive harm. www.P65Warnings.ca.gov