Sundance® Spa Parts

6600-152, SUNDANCE® Spa SideControl, 2 pump w/ 75 ft,harness, For Inground Spas   6600-152 SUNDANCE® Spa Side Control: 1993-1999 800/850 Control Panel, 75 ft cable harness (2-Pump). For Inground Spas. Comes with only one wire...

SUNDANCE® Spa Side Control, 800 Series / 850 Series2 Pump, For Inground Spas, Includes 40 ft. length cable harness 10 pin connectionThis is the replacement for obsolete part 6600-049, 1 pump inground spas

Sundance® Spas, Jacuzzi® Hot Tubs Hi-Limit Sensor, 24" cable Sundance®, Jacuzzi® Hi-Limit Sensor. Replaced 6600-140. Used for the following models: 1.  2008+ 680 Burlington Models Equipped with Circ Pump 2.  2007+ 680...

6600-122 SUNDANCE® Temperature Sensor for 701, 724 Inground Spas The connectors on the Flow Switch are attached to a pc board connector that is located on the PC Board (usually at the top). There are other wires connected to this plug: Jumper...

Sundance® Spas,  Jacuzzi® Hot Tubs Hi-Limit SensorFor all Sundance® Spas Series 400, 600, 600-S, 600-DX, 8001992 Suncoast Systems with High Flow Heater1994-98 Suntub Systems (replaces 6600-062)Jacuzzi® Hot Tubs 2006-2009 J-400...

6600-106 SUNDANCE®® Temperature Sensor for Drywell EP 800 Systems Inground Spas To remove a sensor or switch wire from the sensor harness connector, insert a paper clip into the slot corresponding with the wire to be removed. This will depress...

6600-049, SUNDANCE® Spa Side Control, 800,850 Series, 1 Pump, For Inground Spas OBSOLETE use 6600-148 6600-049 SUNDANCE® Spa Side Control, 800, 850 Series, 1 Pump, For Inground Spas: 1993-1999 800/850 Control Panel, 40 ft cable harness (1-Pump)...

Sundance® Spas Stainless Metal Grip Bar 9.5"

Sundance®, Jacuzzi® Pillow Screw Threaded Bushing BackingUsed with pillow attachment screw. The head is 1" across. Total length is 1 3/8". Priced per each. For Jacuzzi® Spas, used for 2002+ J-300 Series Models.

6570-070, Sundance® & Jacuzzi Wet End Pump Screws Sundance® Wet End Pump Screws. Self tapping: 10-12x1.0. Quantity of 8.

Sundance® Spas Jacuzzi® Hot Tubs Motor Mount Insulator .75" or 3/4" rubber (Qty 2) 6570-023 Motor Mount insulators are used on the Sundance® Spa Pumps. Typically when they come off, the lower threaded section stays screwed into the wood and...

Sundance® Spas Jacuzzi ® Pressure Switch Tecmark Pressure switch for all Balboa Systems and 6500-211 / 6500-214 heaters. Used in many Sundance® Spas 400,600,700 Series as well as in the Sweetwater Spa Series. Tecmark, Tridelta Series 3000...