Sundance® Spas Jacuzzi® Hot Tubs Motor Mount Insulator .75" or 3/4" rubber (Qty 2)
- SKU:
- 3200756
- MPN:
- 6570-023, 630-6121
- Availability:
- In Stock
Description
Sundance® Spas Jacuzzi® Hot Tubs Motor Mount Insulator .75" or 3/4" rubber (Qty 2)
6570-023 Motor Mount insulators are used on the Sundance® Spa Pumps.
Typically when they come off, the lower threaded section stays screwed into the wood and is usually seized in the wood by rust. The part that comes off is only part of the Insulator.
To make them work, you would have to cut off the bottom threaded shaft unless you can extract the other part out of the screwed fitting mounted in the wood.
| Ref. No. | Descripton | Pump | Part No./ SKU |
| 1A. | Housing back, TheraMax (Volute), 56 Frame (Export) | All | 6000-152 |
| 1B. | Housing back, TheraFlo (Volute), 48 Frame | All | 6000-153 |
| 2A. | Seal assembly (North American)-PS200 | All | 6500-447 |
| 2B. | Seal assembly (Export)-PS200 | All | 6500-446 |
| 3A. | Impeller (North American), TheraMax (2.5 HP) | All | 6000-036 |
| 3B. | Impeller (North American), TheraFlo (2.0 HP) | All | 6000-048 |
| 3C. | Impeller (Export), TheraMax (2.0 HP) | All | 6000-220 |
| 3D. | Impeller (North American), TheraMax (1.5 HP) | All | 6000-049 |
| 4. | Wear ring | All | 6000-205 |
| 5. | Housing O-Ring | All | 6000-154 |
| 6. | Housing front (volute) | All | 6000-151 |
| 7. | Drain plug O-Ring | All | 6000-204 |
| 8*. | Drain plug | All | 6000-047 |
| 9A. | Union assembly (straight) includes O-Ring | All | 6500-232 |
| 9B. | Union assembly (45°) includes O-Ring | All | 6500-037 |
| 10. | Nut | All | 6570-126 |
| 11. | Washer (split lock) | All | 6570-127 |
| 12. | Washer | All | 6570-509 |
| 13A. | Motor mount insulator (North American), 0.75" | All | 6570-023 |
| 13B. | Motor mount insulator (Export), 1" x 1.25" | All | 6570-011 |
| 14 | 2" Replacement split nut | All | 6000-031 |
| 15A. | Start capacitor (Export/50 Hz-EMG Motor) | All | 6000-116 |
| 15B. | Start capacitor (Export/50 Hz-Magnetek Motors) | All | 6000-112 |
Related Products
Related Products
6541-223 Sundance® Spas Cap, All 1998 Models
$12.34
6541-223 Sundance® Spas Cap, All 1998 Models
Used with 6541-224 Knob (sold separately)
6540-868 Sundance® Spas Diverter Valve Stem O-Ring (Qty. 2)
$2.85
6540-868 Sundance® Spas Diverter Valve Stem O-Ring (Qty. 2) Used on both 6000-104 and 6540-966 Diverter Valves. Use with 6570-248 Nylon Washer. The number of O-Rings used on the Valve vary because of...
Sundance® Spas Directional Jet Face 3-3/4"
$38.67
Sundance® Spas, Directional Jet Face, Gray. Jet Face diameter: 3 3/4". Comes with Stainless Steel escutcheon / outer ring
6540-865 Sundance® Spas O-Ring, Body for Diverter Cap
$4.88
6540-865 Sundance® Spas O-Ring, Body for Diverter Cap
O-Ring used on Diverter Valve for cap.
If it is leaking from there, make sure and do not overtighten the cap. It could break the Wall Fitting...
4.25" Sundance® Spas / Jacuzzi® Hot Tubs SMT Jet, 2003-2005 Del Sol 4.25"
$19.78
6540-820 Sundance® Spas / Jacuzzi® Hot Tubs SMT Jet, 2003-2005 Del Sol2003-2005 Del Sol SMT Jet, Textured Gray. 4.25" Jet Front.For Jacuzzi® Spas, also used for 2005+ J-200 Series models.